12X16 Cabin With Loft Floor Plans

October 26, 2022

12×16 Shed Plans – Gable Design

12×16 Shed Plans - Gable Design - Materials List

Shopping List Shopping List 2 – pressure treated 2×6 – 16′ 13 – pressure treated 2×6 – 12′ 4 – pressure treated 4×4 – 16′ 6 – 2×4 – 16′ 93 – 2 ×4 – 8′ 19 – 2×4 – 12′ 4 – 2×6 – 8′ 10 – 1×4 – 8′ 6 – 3/4″ tongue and groove plywood – Sheets 4'x8′ 17 – Exterior sheathing plywood t1-11 – 4'x8′ Sheets 10 – 1/2″ Plywood – 4'x8′ Sheets Roof Spikes Roofing Felt Clips Drip Tape 3 1/2″ Galvanized Nails 1 1/4″ Galvanized Finish Nails 2 Galvanized Nails 2″ deck screws 6 – door hinges 2 – door handles

Cut list Cut list 2 – pressure treated 2×6 – 16′ 13 – pressure treated 2×6 – 11′ 9″ 4 – pressure treated 4×4 – 16′ 4 – 2×4 – 16′ 2 – 2×4 – 15′ 5″ 54 – 2×4 – 7′ 6″ 15 – 2×4 – 12′ 4 – 2×4 – 11′ 5″ 26 – 2×4 – 7′ 8 11/16″ 13 – 2×4 – 2′ 8 3/8″ 16 – 2×4 – 2′ 1 3/4″ 4 – 2×6 – 7′ 8 11/16″ 10 – 1×4 – 8′ ( cut to size) 6 – 3/4″ tongue and groove plywood – 4'x8′ sheets (cut to size) 17 – exterior sheathing plywood t1-11 – 4'x8′ sheets (cut to size) 10 – plywood 1 /2″ – 4'x8′ sheets ( Cut to size )

The hangar floor is constructed with pressure treated 2×6s and pressure treated 4×4s. Attach the 4×4 runners by nailing 3 1/2″ nails through the floor frame and into the 4×4 runners. The front wall frame will have a door and a window, for instructions on framing the door and window, see pages below:

Assemble the front and back wall frame using 3 1/2" nails. If you would like to add a double door to the side wall of the shed, see this page for details: Shed Door Plans

Assemble the side wall frame using 3 1/2" nails. To build the 1′ overhang, cut 2×4s to 2′ 1 3/4″ long for the stabilizers. Once the outriggers are installed, cut the 2x6 headliner as shown above and install with 3 1/2″ nails. Cut the 2×4s to size and install them between the rafters with 3 1/2″ nails.